Cookie Consent by FreePrivacyPolicy.com
Brighton:(01273)041500 | Portsmouth:(02392)808888
Chichester:(01243)960888 | Petersfield(01730)634888

The Camilla 3.4Kw Catalytic Heater is a ideal power-cut backup, to stand-by for your home heating system, shop or office spaces. It has variable heat settings, electronic battery powered ignition within the controls, a gas cylinder back support and castors for enhanced mobility.

It offers a well-balanced ratio between radiation and convection heat. The hot surface works on a much lower temperature so that the radiation is softer. It burns gas at a lower temperature because of the catalytic panel made of aluminium fibres which gives the heater its name. The catalytic panel is coated with catalysers and allows the gas/oxygen mix to burn without emitting any flames.

The benefit of this Catalytic Heater is a very high wind resistance, as there is no flame that can be blown out, there is also an extremely limited risk that an object covering the heater or positioned very close to the heater will get damaged or catch fire.

Catalytic heaters also have a low CO2 emission. These various properties make the heaters very user-friendly as the power can be easily adjusted and the product operates silently.

The ODS (oxygen depletion system) safety valve and flame failure device are security features that ensure the gas supply is cut off if oxygen levels are too low or if the cabinet should fall over.

  • Made in Europe
  • Hose and 21mm Butane Gas Regulator included

SPECIFICATION

HEAT OUTPUT: 3.4 kW
CYLINDER SIZE: 15 kg
GAS TYPE: Butane
DIMENSIONS: Width: 45.5 cm | Depth 35 cm | Height: 78 cm